Use approximately 2 – 2 1/4 quarts (1.9 L – 2.15 L) of clean potable water for 25 lbs (11.3 kg) of PERMACOLOR Grout. Do not use with 1776 Grout Enhancer or any other latex additive. Place water in a clean mixing container and add grout powder. Mix with a slow speed drill mixer (300 rpm) for 1 minute.Click to see full answer. In this way, what is Permacolor grout?PERMACOLOR Grout is a high performance, fast setting grout that provides a grout joint that is dense and hard. PERMACOLOR Grout is color consistent. Mix only with water.Likewise, does Permacolor grout need to be sealed? PERMACOLOR® Select does not require sealing, however, if even greater protection is desired, the following STONETECH® products listed below may be used. Follow specific installation instructions indicated for each STONETECH® Professional Sealer. Regarding this, is Permacolor Grout sanded or unsanded? Use sanded grout (e.g. LATICRETE PERMACOLOR® Select) for all other types of tile or stone or grout joints greater than 1/8″ wide. Sanded grouts can be used in grout joint widths 1/16″ (1.5mm) or greater in width. Unsanded grout can only be used in grout joint widths 1/8″ (3mm) or less.Does all grout need to be sealed?Yes, not every type of grout needs to be sealed. However, before applying epoxy grout, unsealed tiles such as natural stone surfaces must be sealed first. Certain types of tile surfaces, such as non-porcelain ceramic tiles, do not need to be sealed.
ncG1vNJzZmivp6x7pLHLnpmroaSesrSu1LOxZ5ufonuotI6hprBllKR6urvUZqysnV2lsrO5wJympaeiYrSzu9StZg%3D%3D